Windows Vista comes with a new bootloader và gives users much more control over the bootloading process - but it"s almost impossible to use. EasyBCD is an advanced GUI that makes it easy to modify the Windows Vista bootloader & the entries in it, all of it is a cliông xã away. EasyBCD is a utility used khổng lồ add, remove sầu, change, và configure entries in the normally difficult lớn tweak Windows Vista boot loader, and allows end users to perkhung a range of actions that include adding Vista & Legacy based entries lớn the boot loader, backing up và restoring boot loader settings, disabling x64 Edition driver checks, limiting the amount of physical memory and/or processors available to lớn Windows Vista, recovering a fried Master Boot Record, and regaining lost operating systems from Windows 2000, XP, và Vista.
Bạn đang xem: Meeting minutes
EasyBCD Free và Safe Download!EasyBCD Lademo Version!Works with All Windows versionsUsers choice!
EasyBCD is a sản phẩm developed by Easybcd. This site is not directly affiliated with Easybcd. All trademarks, registered trademarks, hàng hóa names và company names or logos mentioned herein are the property of their respective sầu owners.
DMCA / REMOVAL REQUEST
Please include the following information in your clalặng request:
You may sover an email khổng lồ tư vấn
Winlite iso tệp tin tải về 72 mb. You can find a lot of useful information about the different software on our QP. Download Blog page.
Lathử nghiệm Posts:
How do I uninstall EasyBCD in Windows Vista / Windows 7 / Windows 8?Cliông chồng "Start"Clichồng on "Control Panel"Under Programs clichồng the Uninstall a Program link.Select "EasyBCD" & right cliông chồng, then select Uninstall/Change.Click "Yes" lớn confirm the uninstallation.
Easybcd Windows 10 Crack
How vì chưng I uninstall EasyBCD in Windows XP?Cliông chồng "Start"Click on "Control Panel"Cliông chồng the Add or Remove Programs ibé.Cliông xã on "EasyBCD", then click "Remove/Uninstall."Cliông chồng "Yes" khổng lồ confirm the uninstallation.
How vày I uninstall EasyBCD in Windows 95, 98, Me, NT, 2000?Click "Start"Clichồng on "Control Panel"Double-click the "Add/Remove Programs" icon.Select "EasyBCD" & right click, then select Uninstall/Change.Cliông xã "Yes" to confirm the uninstallation.How much does it cost to lớn tải về EasyBCD?
Nothing! Download EasyBCD from official sites for không tính tiền using QPDownload.com. Additional information about license you can found on owners sites.How vị I access the không tính tiền EasyBCD download for PC?
It"s easy! Just clichồng the không tính phí EasyBCD tải về button at the top left of the page. Clicking this link will start the installer to lớn download EasyBCD không tính phí for Windows.Will this EasyBCD download work on Windows?
Yes! The không tính phí EasyBCD tải về for PC works on most current Windows operating systems.
This page discusses the boot.ini file, an integral part of the traditional Windows bootloader for older versions of Windows (Windows NT, 2000, & XP).
Contents1 About BOOT.INI1.2 A typical BOOT.INI file:2 Rebuilding BOOT.INI
A tệp tin called BOOT.INI stores information regarding the physical location(s) of your various Windows NT-based installations. NTLDR accesses this tệp tin to get a danh mục of the installed operating systems & display them in the on-screen boot menu for the over user lớn pick và OS to lớn load inlớn.
If you’re getting a BOOT.INI-related error, then you need lớn create or update your BOOT.INI file khổng lồ reflect the correct system information.
BOOT.INI is stored in the root of your “system” partition, which contains other files like NTLDR, NTDETECT, & a BOOT thư mục.
A typical BOOT.INI file:
The section entitled
This section lists the operating systems installed on this physical machine. Each operating system has a line that describes its location in standard ARC path format.multi(0): The adapter of the hard disk that Windows is on. Keep it phối to lớn 0.disk(0): The physical disk number lớn load Windows from ifmultiis not used. Since we’re using multi, keep this 0 as well.rdisk(x): The physical disk number to lớn load Windows from. rdisk() begins counting from 0, so the first drive sầu on your system is rdisk(0), the second is rdisk(1), and so on and so forth.These numbers do not relate to the SATA channel numbers or the IDE primary/secondary – master/slave connections, but khổng lồ the order of your drives as seen by the BIOS, so that rdisk(0) is the drive sầu you are booting from etc.partition(y): The number of the partition on the drive rdisk(x). partition(y) starts counting from 1, so the first partition is partition(1), the second is partition(2), etc.partition(y) counts primary partitions first then counts logical partitions. The extended partition (the “container” for logical partitions) itself isn’t counted, though.These numbers are taken from the Partition Table in the Master Boot Record, which will generally be the order in which they were created, which will not necessarily be the same as the order in which they appear on the disk
Because of the two italicised notes above sầu, it can be quite difficult to identify the correct rdisk() partition() combination to describe your XP partition. For this reason alone, you might like lớn take the first of the following options lớn create BOOT.INI.
Related boot.ini errors
There are multiple ways of re-creating BOOT.INI lớn get your system up và running once more, the simplest of which is khổng lồ download EasyBCD 2.0 và use it khổng lồ add an XPhường entry khổng lồ your Vista BCD. It will offer to create boot.ini for you & ensure that it accurately describes your XP system(s) & is correctly located and accompanied by the other necessary XP boot files which it will automatically copy to the correct location. All you need to vì chưng is say “yes please”.
Manually Creating/Updating BOOT.INI
If you’re feeling masochistic and you want to create it manually instead of letting EasyBCD bởi the hard work for you, the historic instructions follow.If you don’t have sầu a tệp tin called BOOT.INI on your boot partition (usually C:), create a new tệp tin in notepad và save sầu it to lớn there, calling it "BOOT.INI" (with the quotes).Copy this khổng lồ the notepad window:Update the rdisk(0) và partition(1) values khổng lồ point to the correct disk and partition numbers. Refer lớn the information above sầu for details on how this number is determined. Make this change lớn both ARC path lines – make sure they’re both exactly the same.Save your changes khổng lồ BOOT.INI & exit notepad.Reboot khổng lồ chạy thử.
Automated Creation of BOOT.INI
If you have sầu a Windows XPhường or Windows 2000 CD lying around, you can use it lớn automatically re-create your boot.ini file to lớn point to the correct partitions.Insert your Windows 2000 or XPhường CD in the drive sầu, and proceed to boot from it.When prompted khổng lồ “Press ‘R’ lớn enter Recovery Console,” vì so.Once in the recovery console you may be asked for the Administrator password for security purposes. If you know it, enter it and hit . If you don’t, use a Windows 2000 CD khổng lồ bypass the prompt.Enter this in the console:The bootcfg commvà will search your hard drive for valid, available Windows NT-XP installations, và proceed to lớn add each to boot.ini. You will be prompted to lớn name each entry (give sầu it any name you like) và provide load options (give sầu it “/fastdetect” without the quotes).The exit comm& will quit the Recovery Console.Remove sầu the 2000/XP.. CD from the drive sầu và reboot.
Boot.ini has been recreated & should vị the triông xã.
Bootcfg utility results screen
By Repair-Installing (aka “In-Place Upgrade”) Windows XP
This is the proverbial “sledgehammer to lớn crack an acorn” approach, and if you dual-boot with a newer version of Windows such as Vista/7/8, it will also require that you repair the new BCD boot process subsequently, because any install of XPhường after Vista/7/8 will regress the newer bootmgr/bcd boot to XP’s NTLDR, which is incapable of being made to lớn boot anything newer than Windows XP..